Illustration shows a thin-film material composed of layers of gallium-arsenide and indium-gallium-arsenide, overlaid with a layer of graphene.
Courtesy of the researchers
Researchers at MIT and Israel's Technion used a thin-film material composed of layers of gallium-arsenide and indium-gallium-arsenide, overlaid with a layer of graphene, as shown in this diagram, to produce strong interactions between light and particles that could someday enable highly tunable lasers or LEDs.
Courtesy of the researchers

Researchers devise new way to make light interact with matter

Reducing the wavelength of light could allow it to be absorbed or emitted by a semiconductor, study suggests.

A new way of enhancing the interactions between light and matter, developed by researchers at MIT and Israel’s Technion, could someday lead to more efficient solar cells that collect a wider range of light wavelengths, and new kinds of lasers and light-emitting diodes (LEDs) that could have fully tunable color emissions.

The fundamental principle behind the new approach is a way to get the momentum of light particles, called photons, to more closely match that of electrons, which is normally many orders of magnitude greater. Because of the huge disparity in momentum, these particles usually interact very weakly; bringing their momenta closer together enables much greater control over their interactions, which could enable new kinds of basic research on these processes as well as a host of new applications, the researchers say.

The new findings, based on a theoretical study, are being published today in the journal Nature Photonics in a paper by Yaniv Kurman of Technion (the Israel Institute of Technology, in Haifa); MIT graduate student Nicholas Rivera; MIT postdoc Thomas Christensen; John Joannopoulos, the Francis Wright Davis Professor of Physics at MIT; Marin Soljačić, professor of physics at MIT; Ido Kaminer, a professor of physics at Technion and former MIT postdoc; and Shai Tsesses and Meir Orenstein at Technion.

While silicon is a hugely important substance as the basis for most present-day electronics, it is not well-suited for applications that involve light, such as LEDs and solar cells — even though it is currently the principal material used for solar cells despite its low efficiency, Kaminer says. Improving the interactions of light with an important electronics material such as silicon could be an important milestone toward integrating photonics — devices based on manipulation of light waves — with electronic semiconductor chips.

Most people looking into this problem have focused on the silicon itself, Kaminer says, but “this approach is very different — we’re trying to change the light instead of changing the silicon.” Kurman adds that “people design the matter in light-matter interactions, but they don’t think about designing the light side.”

One way to do that is by slowing down, or shrinking, the light enough to drastically lower the momentum of its individual photons, to get them closer to that of the electrons. In their theoretical study, the researchers showed that light could be slowed by a factor of a thousand by passing it through a kind of multilayered thin-film material overlaid with a layer of graphene. The layered material, made of gallium arsenide and indium gallium arsenide layers, alters the behavior of photons passing through it in a highly controllable way. This enables the researchers to control the frequency of emissions from the material by as much as 20 to 30 percent, says Kurman, who is the paper’s lead author.

The interaction of a photon with a pair of oppositely charged particles — such as an electron and its corresponding “hole” — produces a quasiparticle called a plasmon, or a plasmon-polariton, which is a kind of oscillation that takes place in an exotic material such as the two-dimensional layered devices used in this research. Such materials “support electromagnetic oscillations on its surface, really tightly confined” within the material, Rivera says. This process effectively shrinks the wavelengths of light by orders of magnitude, he says, bringing it down “almost to the atomic scale.”

Because of that shrinkage, the light can then be absorbed by the semiconductor, or emitted by it, he says. In the graphene-based material, these properties can actually be controlled directly by simply varying a voltage applied to the graphene layer. In that way, “we can totally control the properties of the light, not just measure it,” Kurman says.

Although the work is still at an early and theoretical stage, the researchers say that in principle this approach could lead to new kinds of solar cells capable of absorbing a wider range of light wavelengths, which would make the devices more efficient at converting sunlight to electricity. It could also lead to light-producing devices, such as lasers and LEDs, that could be tuned electronically to produce a wide range of colors. “This has a measure of tunability that’s beyond what is currently available,” Kaminer says.

“The work is very general,” Kurman says, so the results should apply to many more cases than the specific ones used in this study. “We could use several other semiconductor materials, and some other light-matter polaritons.” While this work was not done with silicon, it should be possible to apply the same principles to silicon-based devices, the team says. “By closing the momentum gap, we could introduce silicon into this world” of plasmon-based devices, Kurman says.

Because the findings are so new, Rivera says, it “should enable a lot of functionality we don’t even know about yet.”

Frank Koppens, a professor of physics at the the Institute of Photonic Sciences in Barcelona, who was not involved in this research, says “the quality of this work is very high, and quite an ‘out-of-the-box’ result.” He adds that this work is “highly significant, as it is a clear break with the conventional view on emitter-light interactions.” Since the work so far is theoretical, he says, “the main question will be if this effect is visible in experiments. I’m convinced it will be shown soon, though.”

Koppens says that “one can envision many applications, such as more efficient light emitters, solar cells, photodetectors etc. All integrated on a chip! It’s also a new way to control the color of a light emitter, and I’m sure there will be applications that we didn’t even think of.”

The work was supported by MIT’s MISTI Israel program.